Pump Submersible

Whether you need a pump that is submersible for you home or an above ground pump for your swimming pool, you will find a wide assortment at www.EarthMovement.net. They also carry an assortment of circulator pumps. Earth Movement wants to do more than sell you a pump but hey want to work with you to create a pumping system that will suit your needs. They carry a wide variety of products so that whether you need a pump that is submersible or otherwise, they will have what you need.

If you need a drainage, sump, and utility pump, submersible pumps are available for this particular need, as well. The AMT 1-2" pump is 1/8 to ½ HP and is designed for many applications including sump pits, drainage pits, overflow tanks, basements, dewatering, excavation, grain elevators, construction drainage, cooling towers and more uses that require the removal of clear water. This is a versatile pump, submersible with an automatic float switch, thermal overload protector, and suction screen. AMT made submersible contractor pumps are reliable, cost effective, and low maintenance. It features stainless steel, cast iron, and plastic construction and provides built-in thermal protection.

Another pump that is submersible is the IPT Stainless Sump and Submersible pump. Sizes are 1.5" and 2". This style is slim-designed and light weight, CSA listed, with top discharge and cast-iron impellers. It has a 304 stainless steel casing, motor housing, shaft and hardware. The pump motor is protected by overload or thermal breaker. The pump offers optional float switches which include the mercury free liquid level control and has a piggyback plug molded to the cord allowing the pump motor to plug into the cord and then plug the entire assembly into a standard grounded outlet.

The AMT and Gorman-Rupp Company sump pump is a submersible pump that is designed for use with a truck battery so that it can be used as a back-up unit in the event of a power failure. It can also be used in remote locations where electricity is not available. This pump weights about 28 pounds and is constructed of aluminum with a cast iron impeller. It has a thirty foot power cord and battery clips for easy attachment to a 12-Volt battery. The operating time is approximately 45 minutes on a fully charged 55 amp-hour battery and the maximum liquid temperature is 104 deg. F. It provides a 1/3 HP 12-volt DC motor and a Buna-N Mechanical seal with Carbon and Ceramic Faces. The maximum flow is 42 GPM and it also has an on/off switch in addition to overload protection.

If you know that you need a pump that is submersible but aren't sure which type will best suit your purpose, call Earth Movement at 1-304-549-6214 Monday through Friday EST. They always provide you with a live voice on the other end of the phone to help you with any questions and to take your order. You can also shop their site at EarthMovement.net. Their wide variety of pumps will ensure that you will find the pump you need, submersible or otherwise.